These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck.
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service.
Full bearing support on quill for maximum spindle stiffness. Handwheel speed adjustment of 400 to 5,000 RPM. Large 2-1/4" quill for greater accuracy. 3" column diameter for maximum head support. 6" stroke for deep hole application.
Name | Details |
---|---|
Motor (HP) | 1 HP, 115/230V, 1Ph |
Base Slots Number & Size (In.) | 2 and 1/2 |
Base Work Table (In.) | 12-1/8 x 11-13/16 |
Base Dimensions (In.) | 20-7/16 x 14-3/16 |
Work Table Weight Capacity (Lbs.) | 90 |
T-Slot Centers (In.) | 5-5/16 |
T-Slots Number and Size (In.) | 2 and 1/2 |
Table Travel (In.) | 16-3/4 |
Table Size (L x W) (In.) | 15 x 18 |
Spindle Distance to Table (Max.) (In.) | 25-3/4 |
Spindle Distance to Base (In.) | 44-1/2 |
Spindle Travel (In.) | 6 |
Spindle Taper (In. x TPI) | MT-2 |
Column Diameter (In.) | 3 |
Range of Spindle Speeds (RPM) | 400 - 5,000 |
Number of Spindle Speeds | Variable |
Distance Column to Spindle (In.) | 7-1/2 |
Drilling Capacity Mild Steel (In.) | 1/2 |
Drilling Capacity Cast Iron (In.) | 5/8 |
Drills to Center of Circle (in) | 15 |
Style (Type) | Variable |